1050 aluminum plate manufacturers,1050 aluminum sheets supplier
- Thickness: 0.1-500mm
- Applications: Lithium battery soft connection, tab material, valve, heat sink, signage, electronics, printing, curtain wall, stamping parts, oxide material
WhatsApp for Price: + 86 189 5460 7915
Description
1050 aluminum sheet is 99.5% pure aluminum plate, its calibration resistance is better. The 1050 aluminum plate also has high conductivity because of the addition of 0.4% iron.
As an aluminum sheet 1050 manufacturer and supplier, our 1000 Series Aluminum Sheet includes 1050,1060,1070,1100. The 1050 aluminum sheet is currently the most commonly used series in the conventional industry.
1050 aluminum sheet Chemical Composition
| AI | Si | Cu | Mg | Zn | Mn | Ti | Fe | V |
| 99.5 | — | — | 0.05 | 0.05 | 0.05 | 0.03 | 0.40 | — |
1050 aluminum plate characteristics
1,1050 aluminum sheet has good forming characteristics. high corrosion resistance. good electrical and thermal conductivity.
2. Like other series aluminum plates, 1050 aluminum plates have a long service life. Low cost and high recovery value.
3. 1050 aluminum plate processing technology is more mature. So its price than other series of aluminum plates has advantages.
Uses
1050 aluminum plate can be used in some of the requirements of corrosion resistance and formability are higher. But the strength requirements are not high occasions. Chemical equipment is its typical use.
1050 aluminum plate can also be used in daily necessities. Like lighting appliances, reflectors, decorations, chemical industrial containers, heat sinks, signs. Electronics, lamps, nameplates, electrical appliances, stamping.
1050 Aluminum Plate Mechanical Properties
| Tensile strength σb (MPa) | 60-100 |
| Elongation δ/(%) | ≥23 |
| Elongation 50mm/(%) | ≥25 |
Note: longitudinal mechanical properties of tubes at room temperature
1050 aluminum plate Heat Treatment
- Complete annealing
Heating 390 ~ 430 °C.
According to the thickness of materials, the holding time is controlled within 30 ~ 120 min. The furnace temperature is cooled to 300 °C at 30 ~ 50 °C/H, then air-cooled.
2. Rapid Annealing
Heating 350-370 °C.
According to the thickness of materials. The holding time is controlled within 30 ~ 120 min. Then air-cooled or water-cooled
1050 aluminum plate pricelist
JC Metal is a China 1050 aluminum sheet factory in China. We provide the best quality pure aluminum plate 1050 and customized 1050 aluminum plate for you.
- JC Metal China 1050 Aluminum Plate price = Ingot Cost/Raw aluminum cost + Processing cost.
- 1050 aluminum sheet price is $/ton,$/kg,$/Pound,$/lbs.
- Aluminum sheet 1050 price will be different as per the below factors. Such as Length, Width, Thickness, State, Surfaces Treatment.
- Business Term: FOB,CFR,CIF,DDP,DUP…
- Aluminum sheet price 1050 Payment Term: TT.LC.TT+LC…
Packing
1–Install wooden pallets. Use steel belts to reinforce them to avoid collisions during transportation.
2–Can be packed as per customer’s requirements.
Aluminum Sheet Plate Before Packing
Aluminum Sheet Plate After Packing
Aluminum Sheet Container Loading
1050 Aluminum Sheet/Plate Parameters
The typical temper :1050 h14 aluminum sheet,1050 h16 aluminum sheet,1050 h18 aluminum sheet,aluminum sheet 1050 o.
| Material State | F,O,H12,H14,H16,H18,H19,H22,H24,H26,H28,H111,H112,H114 |
| Thickness | 0.1mm-500mm |
| Width | 100mm-2650mm |
| Length | 500mm-16000mm |
1050 Aluminum sheet stock information
| Specifications(mm) | Status |
| 0.78*1000*2000 | O |
| 4.12*1248*2440 | H24 |
Related Products
Light reflector 1050 aluminum sheet. 1050 Aluminum Coil | 1050 Aluminum Foil | 1050 Aluminum Checker Plate.
