5052 Aluminum Coil

Description

5052 aluminum coil belongs to 5000 series metal aluminum alloy. It is an alloy made up of 2.5% magnesium and 0.25% chromium. JC Metal is a China 5052 aluminum coil manufacturer

It has good workability and weldability, medium static and high fatigue strength. The corrosion resistance is very good, especially in marine environments. This metal has excellent thermal conductivity and low density.

The fatigue properties are excellent. With a limit of 115 MPa while in the H32 temper and 123 MPa while in H34 temper. Compared to the other aluminum alloys, the 5052 grade of aluminum has midway alloying content and strength.

5052 Aluminum Coil Chemical Composition

Si	Cu	Mg	Zn	Mn	Ti	Fe	Cr
≤0.25	≤0.1	2.2-2.8	≤0.10	≤0.10	—	≤0.40	0.15-0.35

Characteristics

The tensile strength range is 31 to 44 KSI.
Excellent workability, weldability and corrosion resistance.
Medium tenacity
Good corrosion resistance
Lower density, High tensile strength,high elongation

5052 Aluminum Coil Mechanical Properties

Alloy Temper	Specified thickness	Tensile strength (MPa)	Yield strength (MPa)	Elongation (%)
5052 HO/H111	0.3~0.63mm	173-213	min66	min 15
5052 HO/H111	0.63~1.2mm	173-213	min66	min 17
5052 HO/H111	1.2~6.3mm	173-213	min66	min 19
5052 HO/H111	6.3~50mm	173-213	min66	min 18
5052/H32 or 5052 H22	0.4~0.63mm	214-262	min159	min 4
5052/H32 or 5052 H22	0.63~1.2mm	214-262	min159	min 5
5052/H32 or 5052 H22	1.2~6.3mm	214-262	min159	min 7
5052/H32 or 5052 H22	6.3~50mm	214-262	min159	min 11
5052/H34 or 5052 H24	0.4~0.63mm	235-282	min180	min 3
5052/H34 or 5052 H24	0.63~1.2mm	235-282	min180	min 4
5052/H34 or 5052 H24	1.2~6.3mm	235-282	min180	min 6
5052/H34 or 5052 H24	6.3~50mm	235-282	min180	min 10
5052/H36 or 5052 H26	0.1~0.32mm	256-303	min200	min 2
5052/H36 or 5052 H26	0.32~0.63mm	256-303	min200	min 3
5052/H36 or 5052 H26	0.63~4mm	256-303	min200	min 4
5052/H38 or 5052 H28	0.15~0.32mm	min269	min221	min 2
5052/H38 or 5052 H28	0.32~0.63mm	min269	min221	min 3
5052/H38 or 5052 H28	0.63~3.2mm	min269	min221	min 4

5052 Aluminum Coil Heat treatment

Homogenization annealing
Heating 440 °C; heat preservation 12 ~ 14 h; air cooling.

Rapid annealing
Heating 350 ~ 410 °C; holding time 30 ~ 120 min; air or water cooling.

High-temperature annealing
Heating 350 ~ 420 °C, holding time 2 ~ 10 min or 10 ~ 30 min, air cooling.

Low-temperature annealing
Heating 250 ~ 300 °C or 150 ~ 180 °C, holding time 1 ~ 2 h, air cooling.

5052 Aluminum Coil Price

1. JC Metal China 5052 Aluminum Coil price = Ingot Cost/Raw aluminum cost + Processing cost.
2. 5052 Aluminum Coil unit price is $/ton,$/kg,$/Pound,$/lbs.
3. 5052 Aluminum Coil price will be different as per the below factors. Such as Length, Width, Thickness, State, Surfaces Treatment.
4. Business Term: FOB,CFR,CIF,DDP,DUP…
5. Payment Term: TT.LC.TT+LC…

Packing

• Core Diameter: 405mm or 505mm
• Protective Film:The film with the customer’s trademark can be customized according to customer requirements.

5052 Aluminum Coil Technical parameters

Typical alloy	5052 aluminum roll, Aluminum coil 5052 h32,5052 h26 Aluminum coil
Material State	F、O、H111、H12、H14、H16、H18、H22、H24、H26、H28、H32、H34、H36、H38
Thickness	0.2mm-10mm
Width	100mm-2650mm
Length	Customized（c）
Typical products	Checkered plate, umbrella frame, special materials for transportation equipment, etc.

Stock information

Specifications(mm)	Status
0.58*1157*C	H36
0.38*1337*C	H32
1.35*1185*C	H32
0.4*1220*C	H32
1.2*830*C	H32
0.80*1220*C	H32
0.25*810*C	H19
2.0*1030*C	O
3.0*1220*C	O
2*1067*C	H24

Market Applications

checkered rolls, umbrella frames, special materials for transportation equipment， Pressure vessels， Marine equipment， Electronic enclosures， Electronic chassis， Hydraulic tubes， Medical equipment， Hardware signs

Related Products

Typical Products: 5052-h32 aluminum coil,h26 aluminum coil